United States
Senergy Wall Systems

Be as Strong as You Like!

Greenville County Detention Center - Greenville, SC

The exterior skin of Channeled Adhesive CI Design uses fiberglass reinforcement embedded in Senergy poylmer-modified cement base coat. Senergy Base Coat provides water-resistance, resilience, and noncombustibility. Senergy Reinforcing Mesh is the source of strength.

More mesh equals more strength.

In most situations, Senergy FLEXGUARD 4 Mesh embedded in base coat creates an optimal blend of strength and economy. For example, Channeled Adhesive CI Design with FLEXGUARD 4 Mesh meets the Miami-Dade County Small Missile Impact test.

The Large Missile Impact test is another matter. This test involves firing a 2x4 lumber stud out of a cannon, directly at the wall! The stud bounces off of Channeled Adhesive CI Design reinforced with HI-IMPACT Mesh. Channeled Adhesive CI Design holds several Miami-Dade County Notices of Approval (NOAs).

Some projects need extra strength in high traffic areas, or for special circumstances. Like Building One at the Greenville County Detention Center in South Carolina. To be strong, the exterior was designed with HI-IMPACT Mesh. To be super strong, portions of the space where detainees exercise use two plies of HI-IMPACT Mesh. Built in 1994, the Detention Center continues to effectively serve its community.

For most buildings, wear and tear is more prominent on the first eight feet above grade. This is a great place to specify HI-IMPACT Mesh. Building resilience and damage-resistance is dramatically increased wherever HI-IMPACT Mesh is used.

Channeled Adhesive CI Design can be as strong as you like. You can specify high strength wherever it is needed. The choice is yours.

FLEXGUARD 4 Reinforcing Mesh

4 ounce/yd² mesh; rated as "Standard Impact Resistance" per EIMA Standard 101.86.

A single-layer application of FLEXGUARD 4 provides reinforcement for wall system areas not expected to receive abnormal abuse or traffic.

HI-IMPACT 20 Reinforcing Mesh

20 oz/yd²; rated as "Ultra High Impact Resistance" per EIMA Standard 101.86 when used in combination with FLEXGUARD 4

HI-IMPACT 20 is a heavy-weight mesh intended for areas expected to receive a high degree of traffic and abuse. (It requires a continuous and overlapped layer of FLEXGUARD 4 or INTERMEDIATE 6.)

INTERMEDIATE 6 Reinforcing Mesh

5.6 oz/yd²; rated as "Standard Impact Resistance" per EIMA Standard 101.86.

A single-layer application of INTERMEDIATE 6 provides reinforcement for wall system areas not expected to receive abnormal abuse or traffic.

INTERMEDIATE 12 Reinforcing Mesh

11 oz/yd²; rated as "Medium Impact Resistance" per EIMA Standard 101.86. INTERMEDIATE 12 in combination with FLEXGUARD 4 yield a rating of "High Impact Resistance" per EIMA Standard 101.86.

INTERMEDIATE 12 is a versatile, intermediate weight mesh. While capable of being used for a complete single-layer application, it is often used in conjunction with FLEXGUARD 4 or INTERMEDIATE 6 to offer added impact resistance at specific areas (i.e. around doors or walkways).

STRONG 15 Reinforcing Mesh

15 oz/yd²; rated as "Ultra High Impact Resistance" when per EIMA Standard 101.86 when used in combination with FLEXGUARD 4.

STRONG 15 is a medium/heavy-weight mesh intended for areas expected to receive traffic and abuse. (It requires a continuous and lapped overlay of FLEXGUARD 4 or INTERMEDIATE 6.)

CORNER MESH

9.0 oz/yd²; pre-marked for easy bending

CORNER MESH is an intermediate-weight mesh for use at exterior corners when added impact resistance or clean, crisp corners are desired. An overlay of FLEXGUARD 4, INTERMEDIATE 6 or 12 is required when CORNER MESH is used.