BASF at "Composites Europe 2013"
- Automotive lightweighting with thermoplastic composites: First Ultracom prototypes
- Wind turbines: New pultruded polyurethane rods for rotor blades
This year, BASF is presenting not only its thermosetting materials at "Composites Europe" trade fair being held in Stuttgart from September 17 to 19, 2013, but also its new thermoplastic composites with continuous fiber reinforcement developed specifically for lightweight applications for the automotive industry. In addition, polyurethane technology news for wind turbine applications will be exhibited by BASF in Hall 4, Booth B26.
Automotive – new composites concepts
First customer prototype demonstrating the new Ultracom package: Rear seatback from Johnson Controls
Following the introduction of its new Ultracom™ product and service concept in June 2013, BASF is now able to present the first prototype composite part demonstrating this service package at the Composites Europe fair: The seatback developed for automobile rear seats by Johnson Controls Automotive Seating together with BASF is based on Ultralaminate™, one of the new continuous fiber-reinforced thermoplastic woven fabrics that is overmolded with Ultramid® ZG7 COM, a specially formulated, high-impact modified polyamide 6. During development, the extensive simulation know-how of BASF was provided as part of the Ultracom package. Compared to the current metal version, the complex composite part provides weight savings of more than 30 percent.
CIFO part: Material, process and component development
In addition, the new CIFO part, its name being derived from Combination of Inmold-Forming and Overmolding, will be displayed at Composites Europe as well. It was developed by BASF to fully exploit all possibilities of composite part design with Ultracom™ in its new manufacturing cell. The multifunctional test part for investigating continuous fiber-reinforced composite component with regard to volume production consists of a 1.5-mm-thick formed laminate and up to 3-mm-thick molded-on functional elements such as ribs and edges. Using this part, with its approximately 20 individual functionalities, it is possible to demonstrate the characteristics of composite part manufacturing. Special features of the component include sealing the edges, long flow paths, formed holes, a rib array, multiply molded-through elements as well as a ribbed U-profile beam.
RTM epoxy fender prototype
In addition to polyamide, the multi-material Lightweight Composite Team at BASF is also developing continuous fiber-reinforced composite concepts based on polyurethane and epoxy resin systems for structural and semi-structural applications. The company is exhibiting its new Baxxodur® System 2202 epoxy resin, developed specifically for high-pressure RTM (Resin Transfer Molding), in the form of a carbon fiber-reinforced fender demonstrator. The epoxy resin system cures at 120 °C with a demolding time of only 2.5 min, exhibits good mechanical properties and has a wide processing window.
New polyurethane concepts: For wind turbines and more
Pultruded polyurethane part
For the first time at Composites Europe, BASF is exhibiting a pultruded part manufactured from Elastocoat® C6226-100 polyurethane resin. Together with its partner Fiberline Composites A/S in Denmark, BASF developed this resin for production of pultruded rods for secure attachment of the rotor blade root to the nacelle. The continuous pultrusion process permits better alignment of the fibers as well as in-line integration of a metal bushing, so that high and constant product quality is assured. The polyurethane resin ensures improved adhesion to the metal bushing and also to the epoxy infusion resin. The pre-manufactured part allows to forego the classical concept of drilling sideway holes to fix the bushings. It thus makes possible a reduction of both blade root and hub diameter, resulting in substantial material savings.
Composite technology: PU foam sandwich
BASF is also showing a sandwich panel with glass fiber-reinforced laminate based on the Baxxodur epoxy resin system and a foam core made from a new, especially fatigue-resistant version of Elastolit® polyurethane foam. For this, the team at BASF Polyurethanes GmbH in Lemförde modified the properties of the previously rather brittle PU foam for use in the sandwich – a four-point bending test validated the significantly improved dynamic properties and high impact strength. This PU molded foam system allows producing complex geometry foams in a single shot and as such complements the new BASF Kerdyn® PET foam.
Wind turbine rotor cross-section
On display for the first time at Composites Europe: the cross-section of a wind turbine rotor incorporating the wide range of BASF products for rotor blade production. The glass fibers are encapsulated in Baxxodur resin, which is ideal for use in vacuum infusion. The Kerdyn PET structural foam provides good mechanical properties to ensure the required stability of the blade's interior. The outer finish of the rotor cross-section employs the RELEST® gelcoat system and the semi-structural Elastan® polyurethane adhesive also belongs to the BASF product line.
Notes for editors:
A press photo can be found at www.basf.com/pressphoto-database, under the heading “Plastics” or by entering the search term "Composite". Text and photo will also be available shortly in the Plastics BASF press archive: www.basf.de/plastics/pressreleases
About BASF
BASF is the world’s leading chemical company: The Chemical Company. Its portfolio ranges from chemicals, plastics, performance products and crop protection products to oil and gas. We combine economic success with environmental protection and social responsibility. Through science and innovation, we enable our customers in nearly every industry to meet the current and future needs of society. Our products and solutions contribute to conserving resources, ensuring nutrition and improving quality of life. We have summed up this contribution in our corporate purpose: We create chemistry for a sustainable future. BASF had sales of €72.1 billion in 2012 and more than 110,000 employees as of the end of the year. BASF shares are traded on the stock exchanges in Frankfurt (BAS), London (BFA) and Zurich (AN). Further information on BASF is available on the Internet at www.basf.com.
Further information on Fiberline Composites is available at: www.fiberline.com
Automotive Lightweight
Sabine Philipp
Phone: +49 621 60-43348
Wind energy
Evelyn Naudorf
Phone: +49 621 60-42223
Polyurethanes
Sylvia Kaufmann
Phone: +49 5443 12-2238
P-13-409