BASF’s innovative back tile adhesive solution

Acronal® 7808 - One easy step to zip tiles tight

Acronal 7808 One easy step to zip tiles right.png

BASF’s Acronal® 7808 is used as a back tile adhesive to securely install tiles with enhanced adhesion and impact resistance. Compared to the traditional thick-bed method, it reduces the usage of cementitious tile adhesive which shortens installation time and cost.

Although large porcelain tiles are growing in popularity due to their stylish looks, they come with several shortcomings. Large porcelain tiles are less water absorbent and much heavier than traditional tiles, presenting a higher risk of detachment. Additionally, the installation cost is higher and thus requires a very secure installation from the beginning.

 

The new back tile adhesive solutions are fast and easy. By applying Acronal® 7808 as back tile adhesive between the tile and cementitious tile adhesive, it effectively promotes adhesion for secure installation especially under water immersed and heated conditions, where traditional thick-bed method has a challenge.

New solution-Back tile adhesive.jpg

How it works?

01_new_solution.jpg
02_traditional_thick_bed.jpg

Polymers are the key to forming strong adhesion between different substrates. Adhesion depends on the amount of polymers between the substrate and tile. Applying Acronal® 7808 on the back of tile increases the polymer concentration at the bonding surface between the tile and cementitious tile adhesive to ensure secure installation.

Acronal® 7808 is easy to use and well performed under various critical environments 

Acronal® 7808 realizes high impact resistance

Hammer Test.png

While using BASF’s Acronal® 7808 as a back tile adhesive, it shows outstanding resistance to hammering. Only small pieces are coming off at a time and it took a very long time to finish the whole tile. The results demonstrate an increase in impact and vibration resistance which leads to tile installations that are more tightly fastened and reliable.